Browse the NAND parts in the catalog and compare their listed interface, capacity and package before requesting a quotation.
NAND families differ in cell type and interface. Micron separates SLC, MLC, TLC and QLC products; these names do not identify an interchangeable ordering code. Check the exact device documentation and host controller requirements, including error correction and device management. Managed eMMC and UFS are listed separately in this catalog.
| Selection dimension | Check for the complete part number |
|---|---|
| Device type | Cell type and parallel or serial interface |
| Host requirements | Controller support and documented error correction |
| Ordering details | Density, package, voltage and temperature grade |
Manufacturer references: Micron NAND flash
Part numbers: 42 · Page 1 / 2
| Part No. | Brand | Series | Specification | Application | Quote |
|---|---|---|---|---|---|
| MT29F2G08ABAEA | Micron | MT29F (SLC NAND) | 2Gb parallel SLC NAND | Data / font storage | Quote → |
| NAND512R3A2SZA6E | Micron | NAND Flash | Nand, 512Mb, SLC, 1.8V, VFBGA | Quote → | |
| MT29F16G08ABACAWP-ITZ:C | Micron | NAND Flash | Nand, 16Gb, SLC, TSOP, 3.3V, 25nm, TSOP, 8-bit | Quote → | |
| MT29F8G08ABACAWP-IT:C | Micron | NAND Flash | Nand, 8Gb, SLC, TSOP, 3.3V, 25nm, 8-bit ECC, Ind. | Quote → | |
| MT29F8G08ABACAH4-IT:C | Micron | NAND Flash | Nand, 8Gb, SLC, 63/120 VFBGA 1 IT | Quote → | |
| MT29F1G08ABAEAWP:E | Micron | NAND Flash | Nand, 1Gb, SLC, 3.3V, 34nm, TSOP, 4-bit ECC | Quote → | |
| MT29F1G08ABAEAH4:E | Micron | NAND Flash | Nand, 1Gb, SLC, 3.3V, 34nm, BGA, 4-bit | Quote → | |
| MT29F1G08ABAEAWP-IT:E | Micron | NAND Flash | Nand, 1Gb, SLC, 3.3V, 34nm, TSOP, 4-bit ECC, Ind. | Quote → | |
| MT29F2G01ABAGDWB-IT:G | Micron | NAND Flash | Nand, 2Gb, SLC, 8/8 UPDFN 1 IT | Quote → | |
| MT29F2G08ABAGAWP-IT:G | Micron | NAND Flash | Nand, 2Gb, SLC, 3.3V, 25nm, TSOP, Ind. | Quote → | |
| MT29F2G08ABAEAWP:E | Micron | NAND Flash | Nand, 2Gb, SLC, 3.3V, 34nm, TSOP, 4-bit or On-die ECC | Quote → | |
| MT29F2G08ABAEAWP-IT:E | Micron | NAND Flash | Nand, 2Gb, SLC, 3.3V, 34nm, TSOP, 4-bit or On-die ECC, Ind. | Quote → | |
| MT29F2G08ABAGAH4-IT:G | Micron | NAND Flash | Nand, 2Gb, SLC, 3.3V, VFBGA, Ind. | Quote → | |
| MT29F4G01ABAFDWB-IT:F | Micron | NAND Flash | Nand, 4Gb, SLC, 3.3V, UPDFN, Ind. | Quote → | |
| MT29F4G08ABADAWP:D | Micron | NAND Flash | Nand, 4Gb, SLC, 3.3V, 34nm, TSOP, 4-bit or On-die ECC | Quote → | |
| MT29F4G08ABADAWP-IT:D | Micron | NAND Flash | Nand, 4Gb, SLC, 3.3V, 34nm, TSOP, 4-bit or On-die ECC, Ind. | Quote → | |
| MT29F4G08ABADAH4:D | Micron | NAND Flash | Nand, 4Gb, SLC, 3.3V, 34nm, VFBGA, 4-bit or On-die ECC | Quote → | |
| MT29F4G08ABADAH4-IT:D | Micron | NAND Flash | Nand, 4Gb, SLC, 3.3V, 34nm, VFBGA, 4-bit or On-die ECC, Ind. | Quote → | |
| MT29F4G08ABAEAWP:E | Micron | NAND Flash | Nand, 4Gb, SLC, 3.3V, 25nm, TSOP, 8-bit ECC | Quote → | |
| MT29F4G08ABAEAWP-IT:E | Micron | NAND Flash | Nand, 4Gb, SLC, 3.3V, 25nm, TSOP, 8-bit ECC, Ind. | Quote → | |
| MT29F128G08AJAAAWP-ITZ:A | Micron | NAND Flash | Nand, 128Gb, SLC, TSOP, Ind. | Quote → | |
| TC58NVG1S3HTA00 | Kioxia | BiCS SLC NAND | 2Gb parallel SLC NAND | Data / industrial | Quote → |
| TH58NVG (BiCS) | Kioxia | BiCS NAND | High-density NAND Flash | SSD / modules | Quote → |
| TC58BVG0S3HTAI0 | Kioxia | NAND Flash | Nand Flash, 1Gb | Quote → |
SLC, MLC, TLC and QLC NAND explained: bits per cell, endurance, speed, pSLC and 3D NAND, with guidance for industrial and embedded designs.
NOR vs NAND flash compared: random reads, XIP, erase blocks, endurance, bad blocks and ECC, and when to use SPI NOR, SPI NAND or parallel NAND.
No. On-die ECC handles error correction, but it does not by itself provide full NAND management. Micron distinguishes this from managed NAND: wear leveling and bad-block management still belong to the host controller. Confirm which functions the exact device and host each provide before ordering.
Factory-marked bad blocks can be an expected characteristic of NAND. For raw NAND, the host must identify and avoid them using the device manufacturer's documented procedure. Check the exact device's bad-block limits and marking rules when setting incoming inspection criteria; do not apply a universal zero-bad-block requirement.
Check the correction strength required by the exact device, rather than relying on a controller's general ECC label. Micron points to the datasheet's Error Management section for the ECC threshold and manufacturer-marked bad-block handling. Compare those requirements with the host controller and driver implementation before qualifying the part.
Include quantities and the requirements that matter for your design.