Short answer: LPDDR5X is a faster extension of LPDDR5. LPDDR5 reaches 6400 MT/s; LPDDR5X was standardized at up to 8533 MT/s, and vendors now list faster LPDDR5X parts (for example 9600 MT/s), with the same basic architecture and similar low-voltage I/O. Choose by bandwidth: calculate what your SoC, GPU or NPU needs in GB/s, check which speeds and widths its memory controller supports, then pick the generation, width (x32 or x64), package and temperature grade. For automotive designs, use automotive-qualified part numbers only.

LPDDR4X vs LPDDR5 vs LPDDR5X

LPDDR4XLPDDR5LPDDR5X
JEDEC standardJESD209-4 familyJESD209-5 familyJESD209-5 family
Max data rate4266 MT/s6400 MT/s8533 MT/s in JESD209-5B; faster vendor bins (9600 MT/s) exist
I/O voltage (VDDQ)0.6 V0.5 V0.5 V (0.3 V with DVFSQ)
Core supply (VDD2)1.1 V1.05 V (VDD2H), plus a lower VDD2L rail1.05 V (VDD2H), plus VDD2L
ClockingCK with DQS strobes (no separate data clock)separate data clock (WCK) and command clockWCK, as LPDDR5
Channel width16-bit channels16-bit channels16-bit channels
Bandwidth, x32 device17.1 GB/s25.6 GB/s34.1 GB/s
Bandwidth, x64 device34.1 GB/s51.2 GB/s68.3 GB/s
Typical usemainstream embedded, IoT, industrial HMIedge AI, tablets, 5G CPEedge AI boxes, digital cockpits, ADAS

LPDDR4 (without the X) uses a 1.1 V VDDQ and is a different, older interface; check which one your SoC supports.

Step 1: calculate the bandwidth you need

Peak bandwidth (GB/s) = data rate (MT/s) × bus width (bits) ÷ 8 ÷ 1000

For example, a x64 LPDDR5X interface at 8533 MT/s gives about 68.3 GB/s peak. A x32 LPDDR5 interface at 6400 MT/s gives 25.6 GB/s. Real sustained bandwidth is lower, so leave margin. If the result is too low, increase the width (x32 to x64 or two devices) before chasing the next speed bin, provided the controller supports it.

Step 2: match width and die count to the controller

LPDDR5 devices are organized as 16-bit channels. A x32 package carries two channels and a x64 package carries four. Capacity grows by stacking dies (dual-die, quad-die and eight-die packages) inside the same footprint. The controller decides how many channels and ranks you can use, so check its supported configurations first.

Step 3: choose the package

  • Discrete packages are easier to route and cool, and make second-sourcing simpler. Most industrial and automotive boards use them.
  • Package-on-package (PoP) stacks memory on the SoC to save board area, but depends on SoC support and is harder for thermals and signal integrity.

Ball counts depend on width and package: for example, Micron x32 parts with the DS package code (such as MT62F1G32D2DS) use a 315-ball TFBGA, and x64 parts with the EK code (such as MT62F1G64D4EK) use a 441-ball package. Always use the exact package drawing from the datasheet.

Step 4: choose the temperature grade

  • Consumer/wireless grades (for Micron, the WT suffix: –25 to +85 °C) cover the typical handheld range.
  • Industrial grades extend to –40 °C at the low end (Micron IT: –40 to +95 °C). Confirm low-temperature start-up and the high-temperature limit, including refresh behavior at high temperature.
  • Automotive grades are AEC-Q100 qualified and cover wider ranges (for Micron: AIT –40 to +95 °C, AAT –40 to +105 °C, AUT –40 to +125 °C), with PPAP documentation and long-term supply programs.

Representative LPDDR parts

TypePart numberBrandKey spec
LPDDR5X (8533)MT62F1G32D2DS-023-WT-CMicron32Gb (4 GB), x32, 315-ball
LPDDR5X (8533)MT62F2G32D4DS-023-WT-CMicron64Gb (8 GB), x32
LPDDR5X (8533)MT62F4G32D8DV-023-WT-CMicron128Gb (16 GB), x32
LPDDR5X (8533)MT62F1G64D4EK-023-WT-BMicron64Gb (8 GB), x64, 441-ball
LPDDR5 (6400)MT62F768M64D4BG-031-WT-AMicron48Gb (6 GB), x64
LPDDR5X (8533)H58G66CK8BX147SK hynix64Gb (8 GB), 315-ball
LPDDR4XW66DP2RQQAGJWinbond8Gb, x32, 3733, –40 to +105 °C
LPDDR4XNT6AP256T32AV-J2Nanya8Gb, x32, 3733
LPDDR4 (automotive)MT53E1G32D2FW-046-AIT-BMicron32Gb (4 GB), x32, 4266, AIT (–40 to +95 °C)

The Micron MT62F family covers LPDDR5 and LPDDR5X speed bins; the speed code in the part number (for example -023 or -031) identifies the bin. See how to read DRAM part numbers. More parts on the Micron, SK hynix, Samsung, Winbond and Nanya pages.

Selection checklist

  1. Calculate required bandwidth and add margin.
  2. Confirm the controller's supported generation, speed bins, channel count and die/rank configurations.
  3. Choose discrete or PoP based on board space, thermals and second-source plans.
  4. Use automotive (AEC-Q100) parts for vehicles and industrial grades for outdoor or fanless equipment.
  5. Lock the full part number, including speed code, temperature grade and die revision.
  6. LPDDR generations move quickly. Ask for lifecycle status and identify a validated alternative from a second manufacturer, checking the ball map and package.

Need LPDDR5 or LPDDR5X options?

SUNTEC supplies LPDDR4X, LPDDR5 and LPDDR5X from Micron, Samsung, SK hynix, Winbond and Nanya. Send your SoC platform, capacity, width and temperature range, including any industrial or automotive requirement, and we will reply within 1 business day with available options. Submit your BOM.

References

  • JEDEC, LPDDR5 standard update press release
  • Micron, MT62F LPDDR5/LPDDR5X data sheets (part-number chart, voltages, temperature grades)
  • Samsung Newsroom, 10.7 Gbps LPDDR5X announcement (2024)