Short answer: A DRAM part number encodes the memory type, density, organization (x4, x8, x16, x32), package, speed bin and temperature grade. Samsung DRAM starts with K4, SK hynix with H5 (components) or HM (modules), and Micron with MT. Read the prefix to identify the family, then use the manufacturer's datasheet for the full decode. Two cautions: the marking printed on a Micron package is often a short FBGA code, not the part number, and a decoded part number tells you what a part should be, not whether it fits your board or is genuine.

Start with the full part number, not the marking

Many FBGA packages are too small for the full part number. Micron prints a five-character FBGA code (for example starting with D9) instead. Use Micron's official FBGA and part marking decoder to map the code to the full part number. Record every character, including the suffix after the hyphen, because parts with the same base number can differ in speed and temperature grade.

Micron: MT + family code

Micron part numbers are the most systematic. The prefix gives the family:

PrefixFamilyExample on our site
MT40ADDR4 SDRAMMT40A512M16TB-062E-IT-R
MT60BDDR5 SDRAMMT60B2G8HB-48B-A
MT41K / MT41JDDR3L (1.35 V) / DDR3 (1.5 V)MT41K256M16TW-107-IT-P
MT53LPDDR4 / LPDDR4XMT53E1G32D2FW-046-AIT-B
MT62FLPDDR5 / LPDDR5XMT62F2G32D4DS-023-WT-C
MT48LC / MT47HSDRAM / DDR2MT48LC16M16A2P-6A-IT-G
MTA / MTCDDR4 / DDR5 modulesMTA9ASF2G72PZ-3G2F1

After the prefix, Micron writes the organization directly: depth × width. 512M16 means 512M words × 16 bits = 8Gb. 1G8 means 1G × 8 = 8Gb. 1G16 means 16Gb. Then come a package code (two letters such as TB or SA), the speed code, the temperature grade and the die revision.

For DDR3, DDR4 and LPDDR parts, the speed code is the clock period in nanoseconds:

Speed codeClock periodData rate
-062E (DDR4)0.625 ns3200 MT/s
-075E (DDR4)0.75 ns2666 MT/s
-083E (DDR4)0.833 ns2400 MT/s
-107 (DDR3/DDR3L)1.07 ns1866 MT/s
-125 (DDR3/DDR3L)1.25 ns1600 MT/s
-046 (LPDDR4/4X)0.468 ns4266 MT/s
-023 (LPDDR5/5X)0.234 ns (data clock)8533 MT/s

Micron DDR5 parts use the data rate instead: -48B is 4800 MT/s, -56B is 5600 MT/s, -64B is 6400 MT/s.

Temperature grade: no code usually means commercial (for DDR4 and DDR5, 0 to +95 °C case), IT industrial (–40 to +95 °C), AIT (–40 to +95 °C), AAT (–40 to +105 °C) and AUT (–40 to +125 °C) automotive grades, and WT (–25 to +85 °C) the wireless/handheld range used on many LPDDR parts. Confirm the exact range in the datasheet of your part.

On our site, the colon in Micron's revision code is shown as a hyphen in the page address: MT40A1G16TB-062E IT:F is at MT40A1G16TB-062E-IT-F.

Samsung: K4 + type letter

Samsung DRAM components start with K4. The next letter identifies the type. In our catalog: A is DDR4, B is DDR3, R is DDR5, U is LPDDR4X, Z is GDDR6 and V is GDDR7.

For the Samsung DDR4 components we list, the next fields follow a consistent pattern:

  • Density: 4G = 4Gb, 8G = 8Gb, AG = 16Gb (DDR4 only; Samsung DDR5 uses different codes, for example AH for 16Gb in K4RAH…).
  • Organization: 08 = x8, 16 = x16.
  • Suffix after the hyphen: the second letter is the temperature grade (C commercial, I industrial) and the last two letters the speed bin (RC 2400, TD 2666, WE 3200).
Part numberDecoded (from our spec pages)
K4A8G165WC-BCTDDDR4, 8Gb, x16, 2666, commercial
K4A8G085WC-BIWEDDR4, 8Gb, x8, 3200, industrial
K4AAG165WA-BCWEDDR4, 16Gb, x16, 3200, commercial
K4A8G085WB-BCRCDDR4, 8Gb, x8, 2400, commercial
K4B4G1646E-BMMADDR3, 4Gb, x16, 1866, industrial

Other Samsung families (DDR3, LPDDR, GDDR) use different suffix codes, so do not apply the DDR4 suffix table to them. Samsung modules start with M (for example M393 for DDR4 RDIMMs).

SK hynix: H5 + family code

SK hynix DRAM components start with H5. In our catalog: H5AN is DDR4, H5CG is DDR5, H5TQ is DDR3 (1.5 V) and H5TC is DDR3L (1.35 V). A width digit (8 = x8, 6 = x16) follows the density on DDR4 and DDR3 parts (H5AN8G8N…, H5TQ2G83…), but comes before it on DDR5 parts (H5CG48AG… is x8, H5CG46AG… is x16).

Part numberDecoded (from our spec pages)
H5CG48AGBDX018DDR5, 16Gb, x8, 5600
H5CG46AGBDX017DDR5, 16Gb, x16, 5600
H5TQ2G83GFR-RDJRDDR3, 2Gb, x8, 1866, industrial

SK hynix modules start with HM: HMA for DDR4 modules and HMCG for DDR5 modules, where an R or U later in the part number marks an RDIMM or UDIMM. For example, HMCG78AGBRA is a DDR5 RDIMM.

Decoding is not the same as compatibility or authenticity

  • Same base number, different suffix: a faster speed bin can usually run at a slower setting, but a commercial-temperature part cannot replace an industrial one. Compare density, width, package, voltage, timing and temperature against your controller, then validate on the board.
  • Marking lookups do not prove authenticity. A decoder confirms which part number a marking corresponds to. It says nothing about where a physical part came from or its condition. Use traceable sourcing and incoming inspection for that.

To compare memory generations rather than individual parts, see DDR4 vs DDR5 and LPDDR5 vs LPDDR5X.

Not sure what a part number means?

Send us the full part number (or a clear photo of the marking) with your platform and quantity. SUNTEC (Suzhou SUNTEC Electronics Co., Ltd.) supplies Samsung, SK hynix, Micron and Nanya DRAM with batch-traceable, inspected shipments, and replies within 1 business day. Submit your BOM.

References

  • Micron, FBGA and component marking decoder
  • Micron, MT62F LPDDR5/LPDDR5X data sheet (part-number chart and temperature grades)
  • Micron, 16Gb DDR5 SDRAM addendum, die revision D (speed codes -56B, -64B)
  • Samsung Semiconductor, M393A2K40BB2 DDR4 RDIMM data sheet (module numbering and speed suffixes)