Short answer: For a new design that needs 8 GB to 128 GB of managed NAND, pick an eMMC 5.1 part, size it with 30% to 50% headroom, and check the temperature range before anything else. Samsung lists its standard eMMC 5.1 at -25 °C to 85 °C; its automotive eMMC 5.1 covers -40 °C to 95 °C or 105 °C. In a Samsung KLM part number, the characters right after "KLM" give the capacity, for example KLM8G is 8 GB and KLMAG is 16 GB. Many KLM part numbers that appear in older BOMs are no longer listed on Samsung's public website, so confirm the datasheet and availability of the exact ordering code before you commit.
When eMMC is the right choice
eMMC (embedded MultiMediaCard) packages NAND flash and a controller in one BGA. The controller handles bad blocks, wear leveling and ECC, and the host talks to a standard eMMC interface, so development is simple.
- Choose eMMC: 8 GB to 128 GB, the SoC has an eMMC host controller, and you want a fast route to production. Typical uses are industrial PCs, IP cameras and NVRs, network equipment, in-vehicle units and consumer devices.
- Move to UFS: you need more sequential bandwidth than HS400 offers or much higher random performance.
- Use SPI NAND or raw SLC NAND: capacity is very small (1 Gb class), you manage the file system yourself, or cost is extremely tight.
eMMC 4.5, 5.0 and 5.1
| Version | JEDEC standard | Fastest bus mode | Main additions |
|---|---|---|---|
| eMMC 4.5 | JESD84-B45, June 2011 | HS200, about 200 MB/s | Common on older platforms |
| eMMC 5.0 | JESD84-B50, September 2013 | HS400, about 400 MB/s | HS400 double data rate mode |
| eMMC 5.1 | JESD84-B51, February 2015 (current revision JESD84-B51B, September 2025) | HS400 | Command queuing, enhanced strobe |
eMMC 5.1 is the safe default for new industrial and security designs. Newer devices work with older hosts at the speed the host supports, so the host controller decides whether you actually get HS400 and command queuing.
What Samsung publishes for eMMC 5.1
| Samsung eMMC 5.1 | Samsung Automotive eMMC 5.1 | |
|---|---|---|
| Interface | HS400 | HS400 |
| Package | 153 FBGA, 11.5 × 13 × 0.8 mm | 153 FBGA, 11.5 × 13.0 × 1.0 mm |
| Capacity | 8 GB to 256 GB | 8 GB to 128 GB |
| I/O voltage | 1.7 V to 1.95 V | 1.7 V to 1.95 V |
| Operating temperature | -25 °C to 85 °C | -40 °C to 95 °C or 105 °C |
The package size is the same family footprint but the automotive part is thicker, so check the height if you plan to use both in one design.
Reading a Samsung KLM part number
Samsung eMMC part numbers start with KLM. The next characters give the capacity; the later characters identify the generation and version, and the suffix after the dash (for example -B041) identifies the package and grade. Always confirm the full code against the datasheet.
| Capacity code | Capacity | Examples on our site |
|---|---|---|
| KLM4G | 4 GB | KLM4G1FETE-B041 |
| KLM8G | 8 GB | KLM8G1GETF-B041 |
| KLMAG | 16 GB | KLMAG1JETD-B041 |
| KLMBG | 32 GB | KLMBG2JETD-B041 |
| KLMCG | 64 GB | KLMCG4JETD-B041, KLMCG2UCTB-B041 |
| KLMDG | 128 GB | KLMDG4UCTB-B041 |
Two parts with the same capacity code are not automatically interchangeable. They can be different NAND generations with different firmware, performance and supply status. A Samsung public site search in November 2026 did not return these individual part numbers, so treat lifecycle as something to confirm for each order.
Selection checks
- Capacity: add up the system image, logs and data, then keep 30% to 50% free. A full eMMC writes more slowly and wears faster.
- Version: lock eMMC 5.1 for new designs and confirm that the host supports HS400 and command queuing.
- Temperature: Samsung's standard eMMC 5.1 is rated -25 °C to 85 °C. If the product must start at -40 °C, use an automotive part or an industrial part from another maker, and check the exact rating in the datasheet.
- Endurance: for video recording or heavy logging, estimate the daily write volume and compare it with the endurance figure in the datasheet. Some parts can be configured as pseudo-SLC (enhanced user area) to trade capacity for endurance.
- Production control: fix the full ordering code, and re-test whenever the code or NAND generation changes.
Switching between eMMC brands
Most eMMC parts use the same 153-ball package, so a second source is often possible, but check more than capacity and version:
- Package and height: 11.5 × 13 mm is common, but thickness varies.
- I/O voltage and bus mode: HS200 and HS400 need 1.8 V I/O; confirm what the board supplies.
- Temperature grade: match or exceed the original rating.
- Boot and partition settings: boot partition size, enhanced user area and other EXT_CSD settings differ between makers, so check the bootloader and production programming scripts.
- Board validation: run boot, power-loss and temperature tests on the real board.
For a -40 °C start, industrial options on our site include the Kioxia THGBMJG6C1LBAU7 (8 GB, rated -40 °C to 105 °C in Kioxia's product brief) and SanDisk industrial iNAND parts such as SDINBDG4-8G-XI1 and SDINBDG4-16G-XI1. Confirm the rating of the exact code in the datasheet.
Send us your requirements
Send us the current part number or BOM, the capacity, temperature range and yearly volume. We will check the version and grade and suggest second-source options. We reply to routine inquiries within 1 business day. Submit your BOM.
References
- Samsung Semiconductor, eMMC product overview: eMMC 5.1 and Automotive eMMC 5.1 interface, package, capacity, I/O voltage and operating temperature
- JEDEC, JESD84-B51 Embedded Multi-Media Card (e•MMC) Electrical Standard, with revision history back to JESD84-B45