Quotes within 1 business day
SUNTEC Suzhou SUNTEC
Home / Product Catalog / Ethernet PHY
COMPONENT CATALOG

Ethernet PHY

Browse Ethernet PHY part numbers and listed specifications. Check link speed, the host MAC interface, and the physical medium before requesting a quote.

Selection Guide

What to Compare Before Ordering

Start with the host MAC interface and the physical link. Check whether the design calls for conventional twisted-pair Ethernet, single-pair Ethernet, or another supported medium. Before choosing a part or evaluating a replacement, check the full ordering code, pinout, and board requirements against the manufacturer documentation.

Selection dimensionCheck for the complete part number
Link speed and mediumRequired speed and port count, plus the line-side standard, such as 1000BASE-T or 1000BASE-T1
Host MAC interfaceCheck whether the host and exact PHY support the same interface, such as RMII, RGMII, or SGMII
Board requirementsSupply and I/O voltage, clocking, pinout, package, and temperature grade
Ordering detailsComplete part number and suffix, required quantity, and manufacturer lifecycle information

Manufacturer references: Realtek RTL8211F(I)-CG · Marvell Alaska 88E151x · Infineon BRIGHTLANE 88Q211x

Brands

Brands in This Catalog

Part Numbers

Listed Part Numbers and Specifications

Part numbers: 18 · Page 1 / 1

Part No.BrandSeriesSpecificationApplicationQuote
RTL8211F-CGRealtekEthernet PHYRGMII Gigabit PHY (most popular)Datacom / industrial Ethernet portsQuote →
RTL8201F-VB-CGRealtekEthernet PHYRMII Fast Ethernet PHYFast Ethernet portsQuote →
RTL8211E-VB-CGRealtekEthernet PHYRGMII/GMII Gigabit PHYEthernet portsQuote →
RTL8201CPRealtekEthernet PHYFast Ethernet PHY (classic)Fast Ethernet portsQuote →
88E1111-B2-NDC2C000MarvellAlaska Gigabit PHYGMII/RGMII/SGMII (classic)Industrial / networking Ethernet portsQuote →
88E1512-A0-NNP2C000MarvellAlaska Gigabit PHYRGMII/SGMII (mainstream)Industrial Ethernet portsQuote →
88E1510-A0MarvellAlaska Gigabit PHYSingle-port Gigabit PHYIndustrial Ethernet portsQuote →
88E1518-A0MarvellAlaska Gigabit PHYSingle-port Gigabit PHYIndustrial Ethernet portsQuote →
88E1112-A0MarvellAlaska Gigabit PHYGigabit PHYEthernet portsQuote →
88E1116R-NNC1MarvellAlaska Gigabit PHYRGMII Gigabit PHYEthernet portsQuote →
88E1145MarvellAlaska Quad-port PHYQuad-port Gigabit PHYMulti-port devicesQuote →
88E1543MarvellAlaska Quad-port PHYQuad-port Gigabit PHYSwitching / multi-portQuote →
88EA1512MarvellAutomotive Ethernet PHYAutomotive Gigabit PHYIn-vehicle networkingQuote →
88Q2112MarvellAutomotive Ethernet PHY1000BASE-T1In-vehicle backbone networksQuote →
BCM5461SBroadcomGigabit PHYSingle-port Gigabit copper PHYNetworking / industrial Ethernet portsQuote →
BCM54210SBroadcomGigabit PHYRGMII Gigabit PHY (EEE)Ethernet portsQuote →
BCM54616SBroadcomGigabit PHYSGMII/SerDes PHYFiber & copper Ethernet portsQuote →
BCM5482SBroadcomDual-port Gigabit PHYDual-port PHYMulti-port networkingQuote →
FAQ

Procurement Questions

Do I need an Ethernet PHY or an Ethernet controller?

A standalone PHY connects a host's Ethernet MAC to the physical medium; it does not add the MAC itself. Some Ethernet controllers combine a MAC and PHY and connect to an MCU over SPI. Check what your processor already integrates and which host interface is available before choosing either type.

Texas Instruments reference

Are RMII, RGMII and SGMII interchangeable when ordering a PHY?

No. These are different interfaces between the host MAC and PHY, rather than interchangeable names for the cable connection. Match the interface supported by both devices, including the required signals and clocks. A matching Ethernet link speed alone does not establish MAC-interface compatibility.

Texas Instruments reference

Can a single-pair Ethernet PHY connect directly to a conventional twisted-pair Ethernet port?

Not simply because the speeds match. Single-pair Ethernet and conventional twisted-pair Ethernet use different line-side standards. A shared headline data rate does not make their ports interoperable. Confirm the line-side standard and cabling supported at both ends before choosing a PHY.

Texas Instruments reference

Request a Quote by Full Part Number

Include quantities and the requirements that matter for your design.

Request a Quote

Fields marked * are required. Your details are only used to reply to your inquiry.

Excel, CSV, PDF, TXT, PNG, JPG or ZIP — up to 3 files, 5 MB each, 10 MB in total.

By submitting, you agree that we use these details to reply to your inquiry as described in our Privacy Policy.

✓ Inquiry received. We reply to routine RFQs within 1 business day and provide a sourcing proposal for complex BOMs within 2 business days. Weekends and public holidays are excluded. These are response and proposal times, not shipping times; lead times are confirmed per order. Urgent? Message us on WhatsApp →
Free BOM Review

Send Us Your BOM

Paste your part list or email an Excel BOM. We reply to routine RFQs within 1 business day and provide a sourcing proposal for complex BOMs within 2 business days. Weekends and public holidays are excluded. These are response and proposal times, not shipping times; lead times are confirmed per order.

  • ✓
    PriceVolume-tiered pricing with currency and tax terms
  • ✓
    Lead TimeAvailability and split-delivery options
  • ✓
    Cross ReferencePin-compatible and spec-compatible alternatives
  • ✓
    Risk NotesEOL, shortage and price-increase alerts with stocking advice

Or email your Excel BOM to suntec@suntecele.com with quantities and target delivery date.

GET QUOTE
Call WhatsAppBOM Quote